Divides NURBS into parts using other objects as cutters.
Steps:
Select objects.
You can select multiple objects to split with multiple objects.
Select the cutting objects.
Press Enter to end the command.
Notes
The Isocurve option only appears when a single surface is selected.
Use Untrim to remove a trimming boundary from a surface.
When you split a surface with a curve in a plan parallel view like the default Top, Front, and Right view, the cutting curve is projected on the surface in the view direction.
When you split a surface with a planar curve in an angled parallel or a perspective view like the default Perspective view, the cutting curve is projected on the surface in a direction perpendicular to the curve plane.
When you split a surface with a 3-D curve in an angled parallel or a perspective view, the cutting curve is pulled onto the surface by closest points.
Options
Point
Pick locations on the curve.
Isocurve
Split an object by its own isoparametric curves. This option only appears when a single surface is selected.
Note: Use the Int object snap for snapping to isoparametric curves intersections.
Options
Direction
U
Splits a surface with isoparametric curves in the surface u-direction.
V
Splits a surface with isoparametric curves in the surface v-direction.
Both
Splits a surface with isoparametric curves in both u- and v-directions.
Toggle
Toggles the direction between u and v.
Shrink
Yes
Shrinks the underlying untrimmed surface close to the trimming boundaries similar to the ShrinkTrimmedSrf command.
No
Does not shrink the underlying untrimmed surface.
|
Main2 > Split Geometry Fix > Split
Edit > Split
|
Divides a planar face of a polysurface with line or an existing curve.
Steps:
Select faces.
Pick the start of a line defines the split edge.
Pick the end point of the line that defines split edge.
Options
Curves
Select an existing curve to use as the cutting object.
|
Solid Editing > Split planar face
Solid > Solid Edit Tools > Faces > Split Face |
Divides meshes into parts with another object.
Steps:
Select objects to split.
Select cutting objects.
|
Mesh > Mesh Split
Mesh > Mesh Edit Tools > Mesh Split |
Pulls a selected curve to a mesh object and uses the curve to divide the mesh.
Steps:
Select a mesh.
Select a cutting curve.
|
None
None |
